Yes, the Curt A20 5th Wheel Hitch item # C16669 will fit in the Demco 5th Wheel Rail Adapter item # DM6194. This adapter will drop right into your 2018 Silverado's factory puck system and provide you with a set of industry standard rails.
The Demco 5th Wheel Rail Adapter item # DM6194 is made in the USA, has a 21,000 lbs capacity, and weighs 120 lbs.
I have linked a couple of pictures below along with an installation video to show you what this adapter looks like when it is installed. view full answer...
If you check out the 30 second mark of the review video link I attached for the Demco Recon hitch part # DM8550043 that you referenced you can see exactly how far the hitch can pivot forward to back as well as side to side. I watched a few other Demco hitch reviews and the pivot of the Recon is about the same as the other ones. It looks like it might move forward to back more than the Hijacker like part # DM8550034. view full answer...
When considering the BAK Revolver X2 # BAK39122 for the 8-foot bed on your 2019 Chevrolet Silverado 3500, the underside of the cover does not extend below the bed rail brackets. This is because the there are rectangular spacers on the sides of the Revolver where the cover meets the brackets. With that being said, no point of the underside of the # BAK39122 extends below the bed rails of the truck.
I went ahead and attached a video that shows these spacers at timestamp 3:38. view full answer...
I have a solution for you but the B&W Ball and Safety Chain Kit item # BWGNXA2061 is a high rise type gooseneck ball that sits up higher than a standard ball so it can not be used with 5th wheel hitches like the Demco Recon item # DM8550045 that you referenced.
Instead, I recommend using the Curt Ball and Safety Chain Loop Kit for Chevy item # C38CR. view full answer...
The Demco 5th Wheel Rail Adapter for Chevy/GMC OEM 5th Wheel Towing Prep Package, part # DM6333 has a shipping weight of approximately 106 lbs. view full answer...
As far as height goes for the Demco HiJacker 5th wheel hitch # DM8550034 the minimum measured up from the base rails in the truck bed is 15-1/4 inches. You should not have a problem closing the Tonneau cover on your 2015 Chevy Silverado 3500HD depending on the type of cover it is. Should there be an issue you can easily unpin the head from the base and set it aside.
The overall width is approximately 31 inches and the overall length is approximately 35 inches. I have included a picture... view full answer...
The rails of the Bak Revolvers like the part # BAK32VR would protrude about 3 inches on either side of the bed rail. So they take up a total of 6 inches of bed space. view full answer...
Trailer makers typically install hitch receivers on their 5th wheel and travel trailers to enable owners to use items like an RV-approved bike rack, such as the Yakima OnRamp Bike Platform Rack # Y36FR. Not all hitch accessories can be used on trailers or motorhomes but this particular Swagman carrier can be used on ANY vehicle, car, truck, van, pop-up camper, 5th wheel or motorhome. This sturdy rack is unique in this respect.
Using a bike rack in the trailer's hitch will put perhaps 150-lbs... view full answer...
While the Westin HDX Winch Mount Grille Guard with Punch Plate - Black Powder Coated Steel # 57-93785 does have a 12,500 lb weight capacity not every winch with a higher capacity will be compatible due to how the mount is set up. I checked out the winch you mentioned and it does require 4 bolts on the front of the winch to attach so this wouldn't work with this grille guard but it wouldn't be because of capacity. view full answer...
The Husky Liners Custom Rear Mud Flaps # HL57871 are a confirmed fit on your 2016 Chevrolet Silverado 3500 dually so long as it does NOT have the factory fender lip or add-on fender flares.
I went to our warehouse and measured this for you to provide the dimensions you were asking for. Please refer to the linked photo I prepared for you. You can compare these dimensions against your fenders to estimate how far down the flaps will extend. view full answer...
The Curt PowerRide 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package # C36WR you were looking at weighs in at 170lbs, and is indeed a confirmed fit for the OEM Prep Package in your 2022 Chevrolet Silverado 3500 with the 8' bed.
This hitch features interlocking dual jaws for 360 degrees of king pin contact that offer a secure and smooth ride, and the one pin head removal makes it very easy to disassemble the hitch which allows you two remove the hitch in two lighter pieces.
I included... view full answer...
Just the head on the Reese M5 5th Wheel Trailer Hitch # RP30890 that you referenced weighs about 48 pounds. The base and legs weigh 105 pounds.
This 20K fifth-wheel hitch is confirmed to fit your 2018 Chevy Silverado 3500 that features the factory rail kit. It will mount directly to the factory pucks in your truck bed and it has a premium single-piece Talon jaw that will wrap completely around the trailer king pin for a secure connection.
I have attached a short video demonstration on... view full answer...
The height of a fifth wheel hitch like the Demco Recon part # DM8550043 that you referenced would be the distance from the top of the rail to the top of the hitch. The height adjustability of the Recon is 15-1/2", 17-1/4", and 18" which you'd need to add the height of the rails to this to get the total height. Depending on how tall your rails are will deterine which of the lower two height settings should be used. view full answer...
60 inches is the length of the box including the lip around the lid of the DeeZee # DZ8560WB that you referenced. The lower portion is exactly 59-1/2 inches wide. view full answer...
The Andersen Ultimate Connection Adapter part # AM3139 that you referenced is height adjustable from 13-1/2 inches to 16 inches. I attached a picture that shows more info on this adapters dimensions as well as shows where the maximum height adjustment line is. The height is set using the two set screws that thread through the outer tube of the adapter and then squeeze the inner tube. view full answer...
There's a couple different Demco Recon 5th wheel hitches so I am sure one of them will fit your 2019 Chevy Silverado 3500 depending on what you're set up for already. I have listed the options below:
The Demco Recon 5th Wheel Trailer Hitch item # DM8550045-5W attaches to a gooseneck ball. If you do not have the puck system or a gooseneck hitch installed you can add a gooseneck hitch using the B&W Turnoverball item # BWGNRK1016.
The Demco Recon 5th Wheel Trailer Hitch item # DM8550043... view full answer...
No, sorry you can't. The head of the B&W Patriot Slider item # BWRVK3270 is different then the Companion and not compatible. Also none of the puck system adapters that provide an industry standard base are compatible with the Patriot because of how low the slider base is.
To use a B&W sliding hitch in your new 2021 Chevy Silverado 3500 with the factory puck system you will need the B&W Companion OEM 5th Wheel Hitch w/ Slider item # BWRVK3775. view full answer...
The dimensions of the mounting bracket that comes in the Curt 5th Wheel/Gooseneck Custom Wiring Harness # C56000 are:
Top to bottom 1-7/8 inches
Side to side 2-1/2 inches
I have attached a picture to illustrate this for you. view full answer...